驰放气发电机组火花塞正确拆卸更换步骤

发布时间:2025-12-24 发布人:中拓 发布来源:http://www.zhongtuopower.cn/

  第一步:确认火花塞的位置:发电机火花塞都在小盖板下方(红色箭头所指)推开盖板 如图:

  Step 1: Confirm the position of the spark plugs: The generator spark plugs are all located under the small cover plate (indicated by the red arrow). Push open the cover plate as shown in the picture:

base64_image

  第二步: 火花塞高压屏蔽冒如图:金属高压屏蔽冒,防辐射、抗干扰。

  Step 2: Spark plug high-voltage shielding, as shown in the picture: Metal high-voltage shielding, anti radiation, anti-interference.

  第三步:拔出高压屏蔽冒如图:红色箭头所指位置:向上拔出高压屏蔽冒(因为机器工作时有震动,为防止高压冒脱落或松动,所以屏蔽冒内有橡胶圈,拔下来时会有点紧,可借助工具如老虎钳等)

  Step 3: Pull out the high-voltage shielding device as shown in the picture: Position indicated by the red arrow: Pull out the high-voltage shielding device upwards (due to the vibration of the machine during operation, in order to prevent the high-voltage device from falling off or loosening, there is a rubber ring inside the shielding device, which may be a bit tight when pulled out, and tools such as pliers can be used)

  第四步:找到火花塞拆卸工具如图取出与火花塞相应的套筒如图:

  Step 4: Find the spark plug disassembly tool as shown in the figure and remove the sleeve corresponding to the spark plug as shown in the figure:

  第五步:拆卸火花塞如图逆时针旋转拆下火花塞

  Step 5: Disassemble the spark plug by rotating counterclockwise as shown in the figure. Remove the spark plug

  第六步:拆卸出火花塞如图火花塞使用久了,上面会覆盖一层积碳,会导致机器启动困难,加速不稳定,油耗增多等多种问题。解决办法: 用火烧,把积碳烧掉。用汽油侵泡后用钢丝刷刷去积碳。直接更换同样型号火花塞。

  Step 6: Disassemble the spark plug as shown in the picture. If the spark plug is used for a long time, it will be covered with a layer of carbon deposits, which will cause various problems such as difficulty in starting the machine, unstable acceleration, and increased fuel consumption. Solution: Use fire to burn off the carbon deposits. Soak gasoline and use a wire brush to remove carbon deposits. Replace the spark plug of the same model directly.

  第七步:全部复位 重新装好火花塞(一定要拧紧),按原来全部复位,重启机器,即可正常使用。

  Step 7: Reset everything and reinstall the spark plugs (be sure to tighten them), reset everything as before, restart the machine, and it can be used normally.

  本文由 驰放气发电机组  友情奉献.更多有关的知识请点击  http://www.zhongtuopower.cn/   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

  This article is a friendly contribution from the exhaust gas generator set For more related knowledge, please click http://www.zhongtuopower.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.

截屏,微信识别二维码