环能瓦斯发电机组使用中遇到水温升高的情况，是哪些原因造成的，作为燃气发电机厂家，让小编带大家共同了解一下。

　　What are the causes of water temperature rise encountered during the use of the Huanneng gas generator set? As a gas generator manufacturer, let me take you to understand together.

　　、是陵油时间过早或过迟属，影响燃烧过程，引起补燃期过长，使冷却水接触气缸壁的时间相对延长，造成水温过高，这个一般是根据反斯环能瓦斯发电机组的品牌不同，它的喷油时间不同，正常的发动机都不会存在这样的问题，除非机器收过损伤。

　　If the oil injection time is too early or too late, it will affect the combustion process, cause a long afterburning period, and prolong the time for the cooling water to contact the cylinder wall, resulting in a high water temperature. This is generally due to the different brands of gas generators with different injection times, and normal engines will not have such problems unless the machine has been damaged.

　　二、是喷油量过大，造成混合气过浓，缓燃期、补燃期相应延长，而使水温过高。这个可能是由于突然加负载，或者突然加大油门造成

　　2、 It is due to excessive fuel injection that the mixture is too rich, resulting in a corresponding extension of the slow burn and afterburn periods, and causing the water temperature to be too high. This may be caused by sudden loading or sudden acceleration of the accelerator

　　三、是畸油器喷油压力过高或过低，使燃油的喷射行程和雾化质量受到影响。喷油压力过高，喷在燃烧室壁上的反斯环能瓦斯发电机组形成液态，不利于雾化险为夷喷油压力低，雾化质量差。喷油器滴油使供油量加大，引起水温过高，严重时使喷油器燃损。

　　3、 It is the high or low injection pressure of the fuel injector that affects the fuel injection stroke and atomization quality. The injection pressure is too high, and the anti sulfur ring energy gas generator unit sprayed on the combustion chamber wall forms a liquid state, which is not conducive to atomization. The injection pressure is low, and the atomization quality is poor. Dripping oil from the fuel injector increases the fuel supply, causing high water temperature and, in severe cases, fuel damage to the injector.

　　四、是配气相位失准，使气缸在压缩终了时压缩压力降低;进气不充分，排气干净，延长了缓燃期和补燃期，引起水温过高。进气系统堵塞也会使混合气体过浓，发动机冒黑烟，动力下降，水温过高。气门和气门座圈磨损，活塞和缸套磨损均使压缩力降低，引起燃烧不良也使水温过高，动力性能下降。

　　4、 It is the misalignment of the valve timing that causes the compression pressure of the cylinder to decrease at the end of compression; Insufficient intake and clean exhaust have prolonged the ignition delay and afterburning period, resulting in excessively high water temperature. Blockage in the intake system can also cause the mixture to become too rich, resulting in black smoke from the engine, decreased power, and excessively high water temperature. The wear of valves and valve seat rings, as well as the wear of pistons and cylinder liners, reduces compression force, causes poor combustion, and leads to high water temperature, resulting in decreased power performance.

　　五、是散热器堵塞、水垢过多及风扇胶带松弛等均会造成水温过高。水泵压力低，流量小，使冷却液循环速度悭，从而造成水温过高。需要定期清洗水箱，更换冷却液六、是发动机内部零部件之间摩擦阻力大，润滑条件不好，排气管或消间器堵塞，发动机负荷过大等也会造成水温过高的现象。检查使用的润滑油的油品及质量。

　　5、 Blockage of the radiator, excessive scale, and loose fan tape can all cause high water temperature. The low pressure and low flow rate of the water pump result in slow circulation of the coolant, leading to excessively high water temperature. Regular cleaning of the water tank and replacement of coolant are necessary. Additionally, high friction resistance between internal engine components, poor lubrication conditions, clogged exhaust pipes or dampers, and excessive engine load can also cause high water temperature. Check the quality and quality of the lubricating oil used.

　　本文由   环能瓦斯发电机组  友情奉献.更多有关的知识请点击  http://www.zhongtuopower.cn/   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Huaneng Gas Generator Unit For more related knowledge, please click http://www.zhongtuopower.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.